Repara tus cosas Comunidad Tienda

Makita DT01 Trigger Switch Replacement

Introducción

This will teach you how to replace your trigger switch on your Makita DT01 drill.

Qué necesitas

  1. Makita DT01 Trigger Switch Replacement, Battery: paso 1, imagen 1 de 3 Makita DT01 Trigger Switch Replacement, Battery: paso 1, imagen 2 de 3 Makita DT01 Trigger Switch Replacement, Battery: paso 1, imagen 3 de 3

    • Lay the device down on its side.

    Editar

  2. Makita DT01 Trigger Switch Replacement: paso 2, imagen 1 de 1

    • Pinch the indents on both sides of the battery.

    Editar

  3. Makita DT01 Trigger Switch Replacement: paso 3, imagen 1 de 1

    • Pull the battery out of the drill

    • Recharge or completely replace the battery

    • Make sure that the battery is removed before further working on the drill. This is so the drill doesn't accidentally activate.

    Editar

  4. Makita DT01 Trigger Switch Replacement, Trigger Switch: paso 4, imagen 1 de 1

    • Unscrew all six 15mm screws with a JIS1 screwdriver bit.

    Editar

  6. Makita DT01 Trigger Switch Replacement: paso 5, imagen 1 de 1

    • Remove the top of the plastic drill case

    Editar

  7. Makita DT01 Trigger Switch Replacement: paso 6, imagen 1 de 1

    • Remove the bottom of the plastic drill case

    Editar

  8. Makita DT01 Trigger Switch Replacement: paso 7, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Use your tweezers to remove the black wire from the motor

    Editar

  9. Makita DT01 Trigger Switch Replacement: paso 8, imagen 1 de 1

    • Use your tweezers to remove the red wire from the motor

    Editar

  10. Makita DT01 Trigger Switch Replacement: paso 9, imagen 1 de 1

    • Your trigger switch should now be removed from your motor

    Editar

  11. Makita DT01 Trigger Switch Replacement: paso 10, imagen 1 de 1

    • Use your tweezers to remove the red and black wires from the two-pronged plug

    Editar

  12. Makita DT01 Trigger Switch Replacement: paso 11, imagen 1 de 1

    • Your trigger switch is now detached from the device

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Victoria Scira

Miembro Desde 02/15/17

226 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 654