Introducción
This guide will walk you through the process of the remote circuit board in a Maisto Rock Crawler.
Qué necesitas
-
-
Use the driver and bit J1 to remove the five 9.5mm Philips screws holding the remote together.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
Equipo
USF Tampa, Team 1-2, Sullivan Spring 2016 Miembro de USF Tampa, Team 1-2, Sullivan Spring 2016
USFT-SULLIVAN-S16S1G2
3 Miembros
6 Guías creadas
5 comentarios
Can you show the wheel controller mechanism. I can see 3 contacts on mine but I think mine is missing something that would bring the contacts together as you turn the wheel to steer left and right. Thanks.
the triger is broken to drive the truck
Somebody have the remote control for
I have a 1970 R/T charger RC car, 2.4GHz, I changed it up fully, but the pairing light wont come on. But I can show the lights,the control power is good.what is wrong can anybody help me find the problem and fix it.
How to pair new controller ?
