Repara tus cosas Comunidad Tienda

Magic Bullet NutriBullet Base Replacement

Introducción

If you notice any sharp, moving components outside of your NutriBullet base, then use this replacement guide to learn how to remove and replace the base.

Qué necesitas

  1. Magic Bullet NutriBullet Base Replacement, Base: paso 1, imagen 1 de 1

    • Unplug the device from the wall and turn the powerbase upside down.

    Editar

  3. Magic Bullet NutriBullet Base Replacement: paso 2, imagen 1 de 2 Magic Bullet NutriBullet Base Replacement: paso 2, imagen 2 de 2

    • Unscrew the four 10mm screws located on the bottom of the powerbase using the Phillips Head #2 Screwdriver.

    Editar

  4. Magic Bullet NutriBullet Base Replacement: paso 3, imagen 1 de 1

    • Once the screws are removed, use slight tension to pull the plastic base up.

    • Make sure the cord does not get caught or frayed by the fan, which is located in the center of the power base.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Angela Wong

Miembro Desde 01/22/15

1,090 Reputación

3 Guías creadas

Insignias: 19

+ 16 más insignias

Equipo

Cal Poly, Team 19-8, Maness Winter 2015 Miembro de Cal Poly, Team 19-8, Maness Winter 2015

CPSU-MANESS-W15S19G8

4 Miembros

10 Guías creadas

3 comentarios

So far it was easy! Yeah!

Elaine - Contestar

With a lot of force can’t get bottom of even 4 screws removed Bullet don’t work anymore may be a piece of junk now

Tommy Simpson - Contestar

Where can you buy the base to replace?

Anne-Christine von Wetter - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 13

Ultimos 30 días: 46

Todo El Tiempo: 9,507