Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Magellan RoadMate 1200 Motherboard Replacement

Qué necesitas

  1. Magellan RoadMate 1200 Motherboard Replacement, Back Cover: paso 1, imagen 1 de 2 Magellan RoadMate 1200 Motherboard Replacement, Back Cover: paso 1, imagen 2 de 2
    • Remove the four rubber caps from the back by using the Phillips #00 screwdriver.

  2. Magellan RoadMate 1200 Motherboard Replacement: paso 2, imagen 1 de 1
    • Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.

  3. Magellan RoadMate 1200 Motherboard Replacement: paso 3, imagen 1 de 2 Magellan RoadMate 1200 Motherboard Replacement: paso 3, imagen 2 de 2
    • Remove the back cover from the device by separating the back cover along its seam.

    • Slowly lift the cover—the speaker is screwed onto the back cover and is connected to the circuit board.

  4. Magellan RoadMate 1200 Motherboard Replacement: paso 4, imagen 1 de 2 Magellan RoadMate 1200 Motherboard Replacement: paso 4, imagen 2 de 2
    • Pull the speaker cord, horizontally, by its base, away from the motherboard.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

  5. Magellan RoadMate 1200 Motherboard Replacement, Motherboard: paso 5, imagen 1 de 2 Magellan RoadMate 1200 Motherboard Replacement, Motherboard: paso 5, imagen 2 de 2
    • Unscrew the 2 screws on either side of the board.

  6. Magellan RoadMate 1200 Motherboard Replacement: paso 6, imagen 1 de 1
    • Lift the circuit board up and disconnect the GPS connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ross Light

Miembro Desde 04/12/10

217 Reputación

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 5,009