Saltar al contenido principal

Partes

No se especificaron partes.

  1. The battery compartment is located in the front-right side of the laptop.
    • The battery compartment is located in the front-right side of the laptop.

  2. To insert the battery, gently slide it into the compartment until it clicks in place.
    • To insert the battery, gently slide it into the compartment until it clicks in place.

    • To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.
    • With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.

  5. Carefully pull up on the front of the keyboard to pop it out from the case. Then slide the back out so the keyboard becomes nearly free.
    • Carefully pull up on the front of the keyboard to pop it out from the case.

    • Then slide the back out so the keyboard becomes nearly free.

  6. Disconnect the ribbon that is connecting the keyboard to the rest of the computer. Pull the keyboard out and repair or replace as needed. Pull the keyboard out and repair or replace as needed.
    • Disconnect the ribbon that is connecting the keyboard to the rest of the computer.

    • Pull the keyboard out and repair or replace as needed.

  7. Remove the RAM board located underneath the keyboard by carefully popping it out from its connection. Reinstall or replace as necessary. Remove the RAM board located underneath the keyboard by carefully popping it out from its connection. Reinstall or replace as necessary. Remove the RAM board located underneath the keyboard by carefully popping it out from its connection. Reinstall or replace as necessary.
    • Remove the RAM board located underneath the keyboard by carefully popping it out from its connection. Reinstall or replace as necessary.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ronan

Miembro Desde 10/10/11

54 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 6-1, Regan Fall 2011 Miembro de Cal Poly, Team 6-1, Regan Fall 2011

CPSU-REGAN-F11S6G1

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 648