Cancelar

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Escrito Por: Corinne Schnieders (y 9 de otros participantes)

Comentarios: 0
Favoritos: 1
Terminaciones: 1

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Dificultad

Muy fácil

Pasos

6

Tiempo Requerido

1 minuto

Introducción

This repair guide will show you how to replace the CD-ROM Drive.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

Paso 1 Battery

Turn the device upside down and then locate the battery latch near the front of the device.

Turn the device upside down and then locate the battery latch near the front of the device.

Paso 2

Slide the latch to the left to release the battery.

Slide the latch to the left to release the battery.

Paso 3

Continue holding the latch then gently pull the battery out of the device.

Continue holding the latch then gently pull the battery out of the device.
Place the battery in a safe location.

Paso 4 CD-ROM Drive

Locate the CD-ROM Drive latch.

Locate the CD-ROM Drive latch.

Paso 5

Slide the latch to the right to release the CD ROM drive.

Slide the latch to the right to release the CD ROM drive.

Paso 6

Continue holding the latch then gently pull the CD-ROM Drive out of the device.

Continue holding the latch then gently pull the CD-ROM Drive out of the device.
Place the CD ROM drive in a safe location.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 9 otros colaboradores

Corinne Schnieders

Miembro Desde 01/04/11

93 Reputación

2 Guías creadas

+ 3 más insignias

Equipo

Cal Poly, Team 10-39, Forte Spring 2011 Miembro de Cal Poly, Team 10-39, Forte Spring 2011

CPSU-FORTE-S11S10G39

5 Miembros

6 Guías creadas

0 Comentarios

Agregar un comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 9

Todo El Tiempo: 2,265