Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Partes

No se especificaron partes.

  1. Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.
    • Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.

  2. Slightly lift the left speaker assembly off the logic board. Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.
    • Slightly lift the left speaker assembly off the logic board.

    • Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.

    • Pry up from beneath the wires.

    • Remove the left speaker assembly from the logic board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,303