MacBook Pro 15" Unibody Late 2011 Lower Case Replacement

Introducción

Remove the lower case to access most of your MacBook Pro's internals.

Remove the following ten screws securing the lower case to the upper case:
Three 13.5 mm (14.1 mm) Phillips screws.
Seven 3 mm Phillips screws.
When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
Remove the lower case and set it aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

22 personas más completaron esta guía.

158,300 Reputación

144 Guías creadas