Saltar al contenido principal

MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement

Qué necesitas

  1. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Lower Case: paso 1, imagen 1 de 1
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.1 mm

    • Two 2.3 mm

  2. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 2, imagen 1 de 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 2, imagen 2 de 2
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

  3. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 3, imagen 1 de 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 3, imagen 2 de 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 3, imagen 3 de 3
    • The lower case has two plastic pegs (red) that fit into plastic clips in the upper case (orange).

    • During reassembly, gently push down the center of the lower case to reattach the case to its two plastic clips.

  4. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Battery Connector: paso 4, imagen 1 de 1
    • Peel back the sticker covering the battery connector.

  5. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 5, imagen 1 de 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 5, imagen 2 de 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 5, imagen 3 de 3
    • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

    • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, I/O Board Cable (Top): paso 6, imagen 1 de 1
    • Remove the four 2.2 mm T5 Torx screws securing the I/O board cable connector covers.

  7. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 7, imagen 1 de 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 7, imagen 2 de 2
    • Remove the left connector cover.

    • Use the flat end of a spudger to pry the left end of the I/O board cable up from its socket on the logic board.

  8. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 8, imagen 1 de 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 8, imagen 2 de 2
    • Remove the right connector cover.

    • Use the flat end of a spudger to pry the right end of the I/O board cable up from its socket on the logic board.

  9. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: paso 9, imagen 1 de 1
    • Peel the I/O board cable up from the adhesive securing it to the fan.

    • Remove the cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,573 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 22

Ultimos 30 días: 85

Todo El Tiempo: 8,857