Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Partes

No se especificaron partes.

  1. Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board.  On reassembly, connect this end first as it does not flex. In a similar fashion, remove the I/O Board connector from its socket on the I/O Board. Remove the I/O Board cable from the MacBook Pro.
    • Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex.

    • In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.

    • Remove the I/O Board cable from the MacBook Pro.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Brett Hartt

Miembro Desde 12/04/10

119,919 Reputación

143 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

135 Miembros

13,923 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 198