MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

Input, Output, Sideput. Whatever kind of putting you will be doing, a faulty I/O board cable is going to severely limit the functionality of your MacBook Pro with Retina display. This guide will show you how to replace it.

Qué necesitas

Paso 1 Lower Case

MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement, Lower Case: paso 1, imagen 1 de 1

Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
Eight 3.0 mm
Two 2.3 mm

Traducir

Paso 2

Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
Set the lower case aside.

Traducir

Paso 3 Battery Connector

MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement, Battery Connector: paso 3, imagen 1 de 1

Peel back the warning label covering the battery connector.

Traducir

Paso 4

Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.
Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Traducir

Paso 5 I/O Board Cable

MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement, I/O Board Cable: paso 5, imagen 1 de 3

MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement, I/O Board Cable: paso 5, imagen 2 de 3

MacBook Pro 15" Retina Display Late 2013 I/O Board Cable Replacement, I/O Board Cable: paso 5, imagen 3 de 3

Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.
In a similar fashion, remove the I/O board cable from its socket on the I/O board.

Traducir