Saltar al contenido principal

Introducción

Use this guide to help you replace a scratched, scuffed, bent or broken bottom panel on your MacBook Pro 15" Retina Display Early 2013.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Sam Lionheart

Miembro Desde 18/10/12

367,471 Reputación

537 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

104 Miembros

8,413 Guías creadas

difficulty moderate? really?

goneiram - Contestar

The difficulty is listed as moderate due to the specialized tools required to get into the device. Not everyone has a pentalobe driver laying around! =)

Sam Lionheart -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 12

Últimos 30 Días: 86

Todo El Tiempo: 11,023