Saltar al contenido principal

MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement

Qué necesitas

  1. MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement, Lower Case: paso 1, imagen 1 de 1
    Herramienta utilizada en este paso:
    Magnetic Project Mat
    $19.95
    Comprar
    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

  2. MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement: paso 2, imagen 1 de 1
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case to remove it.

  3. MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement: paso 3, imagen 1 de 2 MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement: paso 3, imagen 2 de 2
    • The lower case is connected to the upper case with two plastic clips near its center.

    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Sam Goldheart

Miembro Desde 10/18/12

465,275 Reputación

538 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,573 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 27

Ultimos 30 días: 133

Todo El Tiempo: 25,037