Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Prereq for the logic board.

Partes

No se especificaron partes.

  1. Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
    • Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

  2. Move the iSight camera cable aside. Move the iSight camera cable aside.
    • Move the iSight camera cable aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 69