Saltar al contenido principal

MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement

Qué necesitas

  1. MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement, Lower Case: paso 1, imagen 1 de 1
    Herramienta utilizada en este paso:
    Magnetic Project Mat
    $19.95
    Comprar
    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

  2. MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement: paso 2, imagen 1 de 1
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case.

    • Remove the lower case and set it aside.

  3. MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement: paso 3, imagen 1 de 3 MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement: paso 3, imagen 2 de 3 MacBook Pro 13" Retina Display Late 2012 Lower Case Replacement: paso 3, imagen 3 de 3
    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

    • The lower case is connected to the upper case at the center, with two plastic clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 43

Todo El Tiempo: 20,797