Repara tus cosas Comunidad Tienda

MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

Prereq only.

Qué necesitas

  1. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement, Battery Connector: paso 1, imagen 1 de 1

    • Remove the plastic cover adhered to the battery contact board.

    Traducir

  2. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 2, imagen 1 de 1

    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

    Traducir

  4. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 3, imagen 1 de 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 3, imagen 2 de 2

    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

    Traducir

  5. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 4, imagen 1 de 1

    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

    Traducir

  6. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 5, imagen 1 de 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: paso 5, imagen 2 de 2

    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 251