Repara tus cosas Comunidad Tienda

MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

Prereq to remove the logic board

Qué necesitas

  1. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement, Logic Board Assembly: paso 1, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement, Logic Board Assembly: paso 1, imagen 2 de 2

    • Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board.

    • Remove the I/O board cable bracket.

    Traducir

  2. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 2, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 2, imagen 2 de 2

    • Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.

    • Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.

    Traducir

  3. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 3, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 3, imagen 2 de 2

    • Lift the logic board end of the I/O board cable straight up to bend it out of the way.

    • To avoid damage to the cable, fold only at the bend in the I/O board end of the cable.

    Traducir

  4. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 4, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 4, imagen 2 de 2

    • Use the tip of a spudger to lift the right speaker connector straight up out of its socket on the logic board.

    Traducir

  5. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 5, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 5, imagen 2 de 2

    • With the tip of a spudger, push on either side of the I/O board connector to walk it out of its socket on the logic board.

    Traducir

  6. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 6, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 6, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 6, imagen 3 de 3

    • Use the flat end of a spudger to disconnect the keyboard backlight cable and bend it up out of the way of the logic board.

    Traducir

  8. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 7, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 7, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 7, imagen 3 de 3

    • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

    Traducir

  9. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 8, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 8, imagen 2 de 2

    • Carefully pull the DC-In board connector straight out of its socket on the logic board.

    Traducir

  10. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 9, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 9, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 9, imagen 3 de 3

    • Wedge the flat end of a spudger under the left speaker cable near the connector and lift it straight up out of its socket and fold it out of the way.

    Traducir

  11. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 10, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 10, imagen 2 de 2

    • If necessary, peel back any tape covering the microphone cable ZIF connector.

    Traducir

  12. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 11, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 11, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 11, imagen 3 de 3

    • Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector.

    • Pull the microphone cable out of its socket on the logic board.

    Traducir

  13. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 12, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 12, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 12, imagen 3 de 3

    • If necessary, peel back any tape covering the keyboard cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

    Traducir

  14. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 13, imagen 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 13, imagen 2 de 2

    • Pull the keyboard cable straight out of its ZIF socket on the logic board.

    Traducir

  15. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 14, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 14, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 14, imagen 3 de 3

    • Use the flat end of a spudger to pop the trackpad connector straight up off its socket on the logic board.

    • Fold the cable out back over the battery to clear the way for the logic board.

    Traducir

  16. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 15, imagen 1 de 1

    • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

    Traducir

  17. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 16, imagen 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 16, imagen 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: paso 16, imagen 3 de 3

    • Lift the processor end of the logic board up slightly and pull it toward the fan recess to free the ports from the edge of the upper case.

    • Remove the logic board.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

Sam Goldheart

Miembro Desde 10/18/12

465,744 Reputación

538 Guías creadas

Insignias: 48

+ 45 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,767 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 175