Introducción
This cover keeps the RAM levers out of the way of the battery and secures the hard drive. If you got a little overzealous and broke yours, here's how to replace it.
Qué necesitas
-
-
Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
-
-
-
-
Remove the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
17 personas más completaron esta guía.