Repara tus cosas Comunidad Tienda

MacBook Core 2 Duo Hard Drive Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

How to remove the hard drive, along with its cable and bracket from your computer.

Qué necesitas

  1. MacBook Core 2 Duo Hard Drive Replacement, Battery: paso 1, imagen 1 de 1

    • Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.

    Traducir

  2. MacBook Core 2 Duo Hard Drive Replacement: paso 2, imagen 1 de 1

    • Lift the battery out of the computer.

    Traducir

  4. MacBook Core 2 Duo Hard Drive Replacement, Memory Cover: paso 3, imagen 1 de 1

    • Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

    • The screws are captive to the metal memory cover so you cannot lose them.

    • Using The Flexible Extension sold by iFixit will help with this step.

    Traducir

  5. MacBook Core 2 Duo Hard Drive Replacement: paso 4, imagen 1 de 1

    • Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.

    • Lift the memory cover up and out of the computer.

    Traducir

  6. MacBook Core 2 Duo Hard Drive Replacement, Hard Drive: paso 5, imagen 1 de 1

    • Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.

    • The hard drive goes back into its compartment with the label facing down.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

Insignias: 36

+ 33 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 7,448