Saltar al contenido principal

Introducción

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.

    • Use a P5 Pentalobe driver to remove ten screws securing the lower case, of the following lengths:

    • Two 9 mm screws

    • Eight 2.6 mm screws

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Community

107 Miembros

9,562 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 16

Ultimos 30 días: 87

Todo El Tiempo: 8,541