Esta traducción podría no reflejar los cambios más recientes añadidos a la guía de referencia. Ayúdanos a actualizar la traducción o revisa la guía original.
Introducción
Use esta guía para reemplazar su tarjeta AirPort / Bluetooth.
Error
Example:
[video|http://vimeo.com/1234] or [video|http://vimeo.com/1234]Optional Caption[/video]
Current text:
[video | http: //www.youtube.com/watch? v = GKTTs9CEB1M]
Qué necesitas
-
Herramienta utilizada en este paso:P5 Pentalobe Screwdriver Retina MacBook Pro and Air$5.99
-
Retira los siguientes diez tornillos:
-
Dos tornillos Pentalobe de 9 mm y 5 puntos
-
Ocho tornillos Pentalobe de 2,6 mm y 5 puntos
-
-
-
-
Este paso es opcional y no es obligatorio. Tome la lengüeta de plástico transparente que está unida al conector de la batería y tire de ella hacia el borde delantero del aire para desconectar la batería de la placa lógica.
-
-
-
Use el extremo plano de un spudger para levantar los conectores de antena de sus enchufes en la tarjeta AirPort / Bluetooth.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slightly lift the free end of the AirPort/Bluetooth board and pull it out of its socket on the logic board.
-
Remove the AirPort/Bluetooth board from the Air.
-
Para volver a armar su dispositivo, siga estas instrucciones en orden inverso.
Para volver a armar su dispositivo, siga estas instrucciones en orden inverso.
Cancelar: No complete esta guía.
10 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
85%
¡ irlanda nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
6 comentarios
I would like AC WiFi and Bluetooth 4 support by upgrading the internal card. Can you install upgrade WiFi/Bluetooth cards into this slot?
This guide is helpful but doesn’t include the most important part, which is re-connecting the antennas. I’ve done this exact replacement in my mid-2010 13” MBA, and you will need antenna extenders (MHF4 female to male) to make it work. Other discussions on this suggest breaking off the antenna cable bracket near the hinge to get extra length, but that still won’t work. You need extensions. I found mine on eBay US, despite living in Canada - they didn’t appear on my local site for whatever reason.
.
Also, be VERY careful when disconnecting the MHF4 connectors from the card (step 4). They’re rated for 30 disconnects max (I had to do a lot of research to find the right connector) and I managed to break one. I essentially had to tape the socket together once I got the extensions in the mail - just buy them from the beginning so you don’t mess around with trying to lengthen to cord like I did. That’s what caused all my issues.
.
The exact item I bought was “2pcs MHF4 Male to MHF4 Cable Antenna Extension Female.”