Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Apaga el Mac mini, desconecta todos los cables y dale la vuelta.
-
Inserta el Jimmy en la grieta entre la carcasa superior de aluminio y la carcasa inferior de plástico.
-
Insertar traducción aquí
-
-
-
Primero retiraremos la antena AirPort, situada en la esquina inferior izquierda de esta imagen.
-
-
-
-
Retira los dos tornillos Phillips que conectan la parte inferior del disco duro al marco interno.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the speaker cable connector from the interconnect board by lifting its connector up off the socket on the board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the tip of a spudger to de-route the speaker cable from the clip on the internal frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
De-route the speaker cable from within the channel in the internal frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four shouldered Phillips screws securing the speaker assembly to the internal frame.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.