Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Replace a faulty logic board using this guide.

Partes

No se especificaron partes.

  1. Use the flat end of a spudger to pry the power button cable connector up off the logic board.
    • Use the flat end of a spudger to pry the power button cable connector up off the logic board.

  2. Use the flat end of a spudger to pry the sleep light cable connector up off the logic board.
    • Use the flat end of a spudger to pry the sleep light cable connector up off the logic board.

    • During reassembly, make sure the cable does not come near the lug on the bottom case (shown in green) to avoid damaging the cable.

  3. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  4. Remove the single T10 Torx lug next to the RAM sockets on the logic board.
    • Remove the single T10 Torx lug next to the RAM sockets on the logic board.

  5. Use a spudger to lift the free end of the logic board off the bottom housing near the PRAM battery.
    • Use a spudger to lift the free end of the logic board off the bottom housing near the PRAM battery.

  6. While slightly lifting the free end of the board pull it away from the port side of the mini, minding any edges that may get caught.
    • While slightly lifting the free end of the board pull it away from the port side of the mini, minding any edges that may get caught.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,755