Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Apaga el Mac mini, desconecta todos los cables y dale la vuelta.
-
Inserta el Jimmy en la grieta entre la carcasa superior de aluminio y la carcasa inferior de plástico.
-
Insertar traducción aquí
-
-
-
-
Primero retiraremos la antena AirPort, situada en la esquina inferior izquierda de esta imagen.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of a spudger to pry the audio ribbon cable connector up off the interconnect board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of a spudger to pry the following connectors up off the interconnect board:
-
Fan cable.
-
Speaker cable.
-
IR board cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of a spudger to pry the hard drive thermal sensor cable connector up off the interconnect board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two Phillips screws securing the interconnect board to the optical drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of a spudger to separate the interconnect board from the optical and hard drives.
-
Pull the interconnect board away from the drives and remove it from the internal frame.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.