Repara tus cosas Comunidad Tienda

Mac mini Mid 2011 Bottom Cover Replacement

Introducción

Remove the bottom cover to access components inside your Mac mini Mid 2011.

Qué necesitas

  1. Mac mini Mid 2011 Bottom Cover Replacement, Bottom Cover: paso 1, imagen 1 de 2 Mac mini Mid 2011 Bottom Cover Replacement, Bottom Cover: paso 1, imagen 2 de 2

    • Place your thumbs in the depressions cut into the bottom cover.

    • Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case.

    • You do not need to apply much downward pressure while turning.

    Traducir

  3. Mac mini Mid 2011 Bottom Cover Replacement: paso 2, imagen 1 de 1

    • Tilt the mini enough to allow the bottom cover to fall away from the outer case.

    • Remove the bottom cover and set it aside.

    Traducir
Linea de Meta

17 personas más completaron esta guía.

2 comentarios

The base plate on my MM has no thumb dimples, no “lock dots”, and it won’t budge. I’ve tried everything short of prying it off—light touch, firm touch, thumbs, palm, nothing has worked. Any suggestions?

Jonathan Royce - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 26

Todo El Tiempo: 24,290