Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Prereq only.

Partes

No se especificaron partes.

  1. Flip the Mac Pro back over and set it gently on a flat surface.
    • Flip the Mac Pro back over and set it gently on a flat surface.

    • We recommend laying the Mac Pro on the corner of the heat sink and the two standoff screw posts that attach to the interconnect board.

  2. Remove the two 3.6 mm T5 Torx screws from the sides of the power supply cage (one on each side). Remove the two 3.6 mm T5 Torx screws from the sides of the power supply cage (one on each side).
    • Remove the two 3.6 mm T5 Torx screws from the sides of the power supply cage (one on each side).

  3. Remove the power supply cage from the top of the power supply.
    • Remove the power supply cage from the top of the power supply.

    • By removing this cage, you are exposing internal components of the power supply. Be very careful not to touch any of the power supply components or circuitry.

    • Be careful not to drop any screws or tools into the power supply, as this may damage the power supply.

  4. Remove the four 5.5 mm T8 Torx screws securing the power supply assembly to the Mac Pro.
    • Remove the four 5.5 mm T8 Torx screws securing the power supply assembly to the Mac Pro.

  5. Remove the power supply assembly from the Mac Pro.
    • Remove the power supply assembly from the Mac Pro.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Miembro Desde 17/10/09

470,386 Reputación

410 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

134 Miembros

15,565 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 57