Saltar al contenido principal

Mac Pro Late 2013 AirPort Board Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. Mac Pro Late 2013 AirPort Board Replacement, AirPort Board: paso 1, imagen 1 de 1
    • Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.

  2. Mac Pro Late 2013 AirPort Board Replacement: paso 2, imagen 1 de 1
    • Lift and remove the metal cover from the AirPort board bay.

  3. Mac Pro Late 2013 AirPort Board Replacement: paso 3, imagen 1 de 3 Mac Pro Late 2013 AirPort Board Replacement: paso 3, imagen 2 de 3 Mac Pro Late 2013 AirPort Board Replacement: paso 3, imagen 3 de 3
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.

    • Remove the fan assembly ribbon cable from its ZIF socket.

  4. Mac Pro Late 2013 AirPort Board Replacement: paso 4, imagen 1 de 3 Mac Pro Late 2013 AirPort Board Replacement: paso 4, imagen 2 de 3 Mac Pro Late 2013 AirPort Board Replacement: paso 4, imagen 3 de 3
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.

    • Disconnect the fan ribbon cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Miembro Desde 10/17/09

502,275 Reputación

407 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,561 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 63