Mac Pro First Generation Hard Disk Drive (HDD) Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

Replacing the hard drive is straight forward and all you need is a Phillips head screw driver. Use this guide to replace a hard drive in your Mac Pro.

IMPORTANT

Make sure you back up your files onto the replacement hard drive before swapping in the machine. If switching to a brand new hard drive you will probably have to re install your operating system in order to keep your computer running as usual.

Also be careful with your hard drive as damaging it can mean that you lose your files.

Qué necesitas

Paso 1 Case Panel

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Case Panel: paso 1, imagen 1 de 1

Lift the lever to unlock the case.

Traducir

Paso 2

Herramienta utilizada en este paso:

Anti-Static Wrist Strap

$7.95

Comprar

Remove the side panel of the Mac Pro.
Discharge any static electricity by touching a grounded surface prior to working on any internal components. Touching the metal PCI slot covers works great, or any other grounded metal surface. You can also wear a anti-static wrist strap.

Traducir

Paso 3 Locate the Hard Drive Bays

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Locate the Hard Drive Bays: paso 3, imagen 1 de 1

Locate the desired hard drive bay after opening the case .
This is usually the drive closest to the front of the case.

Traducir

Paso 4 Remove the Hard Drive Bay

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove the Hard Drive Bay: paso 4, imagen 1 de 3

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove the Hard Drive Bay: paso 4, imagen 2 de 3

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove the Hard Drive Bay: paso 4, imagen 3 de 3

Make sure that the clip used to release the side panel is open or the Hard Drive bays won't slide out
Pull the Hard Drive straight out by grabbing the metal sled from the bottom. It may be hard to pull out at first, but after it gets released the sled shouldn't take a lot of effort to remove.

Traducir

Paso 5 Remove metal Hard Drive sled

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove metal Hard Drive sled: paso 5, imagen 1 de 3

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove metal Hard Drive sled: paso 5, imagen 2 de 3

Mac Pro First Generation Hard Disk Drive (HDD) Replacement, Remove metal Hard Drive sled: paso 5, imagen 3 de 3

When handling the hard drive hold it by the sled or sides be sure not to touch the green circuit board visible in all 3 pictures.
Locate the four 6-32 type screws on the Hard Drive sled.
Using a Phillips head screw driver remove the four screws and separate the metal sled from the Hard Drive