Saltar al contenido principal

Mac Pro 2009-2012 Optical Drive Replacement

Qué necesitas

  1. Mac Pro 2009-2012 Optical Drive Replacement, Remove Side Panel: paso 1, imagen 1 de 2 Mac Pro 2009-2012 Optical Drive Replacement, Remove Side Panel: paso 1, imagen 2 de 2
    • Lift up the latch

    • Remove the Side panel

    • The hard drives and optical drives are locked in place when the latch is down!

  2. Mac Pro 2009-2012 Optical Drive Replacement, The remove the optical drive carrier: paso 2, imagen 1 de 1
    • Pull out halfway

    • Disconnect the cable(s)

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ben Capehart

Miembro Desde 06/09/21

7,299 Reputación

18 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,521 Guías creadas

2 comentarios

After adding the drive, the computer does not recognize it. If I swap the cables, the other drive is recognized. Is there a software configuration that I need to make?

wmhoover - Contestar

Did you check the cable that won't work for debris?

Ben Capehart -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 21

Ultimos 30 días: 91

Todo El Tiempo: 2,769