Saltar al contenido principal

Introducción

Internal prereq.

  1. Remove the hard drive from the mini, minding any cables that may get caught.
    • Remove the hard drive from the mini, minding any cables that may get caught.

  2. Remove the 7.9 mm T6 Torx screw securing the optical drive to the outer case.
    • Remove the 7.9 mm T6 Torx screw securing the optical drive to the outer case.

  3. Slide the optical drive out of the outer case, minding any cables that may get caught.
    • Slide the optical drive out of the outer case, minding any cables that may get caught.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 675