Repara tus cosas Comunidad Tienda

MSI MS-1782 Back Cover Replacement

Introducción

This guide is for removing the back cover of the MSI MS-1782.

Qué necesitas

  1. MSI MS-1782 Back Cover Replacement, Back Cover: paso 1, imagen 1 de 1

    • Remove five 6.6 mm screws from the edges of the bottom cover using a JIS #1 screwdriver.

    • Remove one 5.6 mm screw from the center of the bottom cover using a JIS #1 screwdriver.

    Editar

  3. MSI MS-1782 Back Cover Replacement: paso 2, imagen 1 de 3 MSI MS-1782 Back Cover Replacement: paso 2, imagen 2 de 3 MSI MS-1782 Back Cover Replacement: paso 2, imagen 3 de 3

    • Use an iFixit opening pick to unclip the bottom cover.

    • It is ok to run the picks along the edges since there is nothing connected to the bottom cover. It is easier to start from the sides and then work your way forward.

    • After unclipping the bottom case, pull from the back of the laptop upwards using the lip of the bottom case as a handle.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 21

Todo El Tiempo: 215