Saltar al contenido principal

MSI GT62VR 6RD Dominator Cooling Fan Replacement

Qué necesitas

  1. MSI GT62VR 6RD Dominator Cooling Fan Replacement, Cooling Fan: paso 1, imagen 1 de 2 MSI GT62VR 6RD Dominator Cooling Fan Replacement, Cooling Fan: paso 1, imagen 2 de 2
    • Remove the six 1.2mm screws on the bottom plate of the laptop using a JIS #0 screwdriver.

  2. MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 2, imagen 1 de 3 MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 2, imagen 2 de 3 MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 2, imagen 3 de 3
    • Insert the plastic opening tools into the seam on the back plate of the laptop.

    • A popping sound may come from your device while you remove the backplate.

    • Pry the back plate up.

    • Slide the plastic opening tool around the laptop's edge slowly until the backplate is completely removed.

  3. MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 3, imagen 1 de 2 MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 3, imagen 2 de 2
    • Remove the three 2.0mm screws using the JIS #0 screwdriver.

  4. MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 4, imagen 1 de 2 MSI GT62VR 6RD Dominator Cooling Fan Replacement: paso 4, imagen 2 de 2
    • The white plastic clip secures the fan wires to the laptop.

    • Unplug the white clip by grasping it and wiggling it back and forth .

    • Do not pull the clip out by the wires themselves.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 4

Todo El Tiempo: 1,527