Partes

No se requieren partes.

  1. Remove the 6 screws on the bottom plate of the laptop using a 1.2mm JIS #0 screwdriver.
    • Remove the 6 screws on the bottom plate of the laptop using a 1.2mm JIS #0 screwdriver.

  2. Insert the plastic opening tool into the back plate of the laptop and lightly pry it up.
    • Insert the plastic opening tool into the back plate of the laptop and lightly pry it up.

    • The laptop cover will break if it is being handled roughly.

    • Slide the plastic opening tool around the laptop's edge gently, slowly popping off the clips securing it into the laptop.

    • Locate the battery.

    • The wires are located at the back end of the battery.

    • Place your hands at the corners of the wires.

    • Pull upward from the back end of the battery where the wires are located.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Rebekah Johnson

Miembro Desde 18/09/18

147 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 38

Todo El Tiempo: 79