Introducción

  • Replace the stock hard drive
  1. Locate and Remove all screws from the backplate.
    • Locate and Remove all screws from the backplate.

    Agregar Comentario

  2. Locate the Hard Drive
    • Locate the Hard Drive

    Agregar Comentario

    • Locate the black rubber spacer

    • Remove space by gently pulling the flap

    Agregar Comentario

    • With two hands slide the Hard Drive to the left.

    Agregar Comentario

    • Lift the Hard Drive using the Spudger.

    • Pull up and remove the Hard Drive

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Matthew Tasker

Miembro Desde 16/04/10

341 Reputación

1 Guía escrita

The screws on my machine were Philips not torx don't know if it is different or has changed at all but all internal and external were Phillips

rambo33hockey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 29

Últimos 30 Días: 115

Todo El Tiempo: 12,098