Introducción

This is to help you take the back panel off your device to help you start the process of replacing things in your device.

Partes

No se requieren partes.

  1. Flip the device over so the back is facing up.
    • Flip the device over so the back is facing up.

  2. Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

    • Once all four screws are removed, lift the back off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 28

Todo El Tiempo: 47