Introducción

Is your computer running slow, or do you need more memory? Use this guide to replace the RAM in your device.

Partes

No se requieren partes.

  1. Flip MSI GP60 2PE Leopard, so that the back is facing up.
    • Flip MSI GP60 2PE Leopard, so that the back is facing up.

  2. Find the unlock tab located on the upper right side of the device, then slide it to the right.
    • Find the unlock tab located on the upper right side of the device, then slide it to the right.

    • Slide and hold the release tab on the left side of the battery, so that you can remove the battery.

    • While holding the release tab, remove the battery slowly.

    • Flip the device over so the back is facing up.

    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

    • Once all four screws are removed, lift the back off.

    • Press the tabs on the side of the RAM to remove it.

    • Slide the RAM out of the slot carefully.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 4

Últimos 30 Días: 30

Todo El Tiempo: 67