Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip MSI GP60 2PE Leopard, so that the back is facing up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Find the unlock tab located on the upper right side of the device, then slide it to the right.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
While holding the release tab, remove the battery slowly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once all four screws are removed, lift the back off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 5 mm black screws on the right hand side with a Phillips #0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the hard drive, then remove from the device. There is a black strip of plastic attached to make the process easier.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.