Saltar al contenido principal

Partes

No se especificaron partes.

  1. Insert iFixit opening tool as shown in the picture to pry up on the keyboard guard. Remove the keyboard guard. Remove the keyboard guard.
    • Insert iFixit opening tool as shown in the picture to pry up on the keyboard guard.

    • Remove the keyboard guard.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Insert the iFixit tool under the plastic screw cover. Grab the plastic part with your hand and lift it off the casing. Remove the plastic part to reveal the screws holding the keyboard in place.
    • Insert the iFixit tool under the plastic screw cover.

    • Grab the plastic part with your hand and lift it off the casing.

    • Remove the plastic part to reveal the screws holding the keyboard in place.

  4. Unscrew the five screws located at the top of the keyboard. Use the opening tool to lift the keyboard from its position Be mindful of the ribbon cables when lifting the keyboard from the palmrest.
    • Unscrew the five screws located at the top of the keyboard.

    • Use the opening tool to lift the keyboard from its position

    • Be mindful of the ribbon cables when lifting the keyboard from the palmrest.

Conclusión

To reassemble your device, follow these instructions in reverse order.

mazin

Miembro Desde 27/09/18

97 Reputación

1 Guía escrita

What about step 4 detaching the ribbon cable?

russell89000 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 9

Últimos 30 Días: 47

Todo El Tiempo: 248