Saltar al contenido principal

MSI GE62 Apache Pro 004 Web Camera Replacement

Qué necesitas

  1. MSI GE62 Apache Pro 004 Web Camera Replacement, Battery: paso 1, imagen 1 de 1
    • Start with the bottom of the laptop facing up.

  2. MSI GE62 Apache Pro 004 Web Camera Replacement: paso 2, imagen 1 de 2 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 2, imagen 2 de 2
    • Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.

    • Remove the bottom plate

    • Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go

  3. MSI GE62 Apache Pro 004 Web Camera Replacement: paso 3, imagen 1 de 3 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 3, imagen 2 de 3 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 3, imagen 3 de 3
    • Remove the screw holding down the battery with a PH1 screwdriver.

    • Pull out the battery.

  4. MSI GE62 Apache Pro 004 Web Camera Replacement, Web Camera: paso 4, imagen 1 de 1
    • Flip over the laptop and open it.

  5. MSI GE62 Apache Pro 004 Web Camera Replacement: paso 5, imagen 1 de 3 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 5, imagen 2 de 3 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 5, imagen 3 de 3
    • Slide a metal opener tool along the outside edges of the front screen panel to start to separate it from the back screen panel.

    • You may need to apply some firm pressure to get it started.

  6. MSI GE62 Apache Pro 004 Web Camera Replacement: paso 6, imagen 1 de 2 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 6, imagen 2 de 2
    • Once it has started to separate, gently pull off the screen panel by working along the edge, and set it aside.

  7. MSI GE62 Apache Pro 004 Web Camera Replacement: paso 7, imagen 1 de 2 MSI GE62 Apache Pro 004 Web Camera Replacement: paso 7, imagen 2 de 2
    • Locate the WebCam on the middle of the device.

    • Slide a metal opener tool to remove the Webcam

Conclusión

To reassemble your device, follow these instructions in reverse order.

Majid Al Hashmi

Miembro Desde 02/13/18

283 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S15-G5, Boczar Spring 2018 Miembro de USF Tampa, Team S15-G5, Boczar Spring 2018

USFT-BOCZAR-S18S15G5

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 822