Saltar al contenido principal

MAGNAVOX MDV2300 Power Cord Replacement

Qué necesitas

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: paso 1, imagen 1 de 1
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: paso 2, imagen 1 de 1
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: paso 3, imagen 1 de 1
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: paso 4, imagen 1 de 1
  5. MAGNAVOX MDV2300 Power Cord Replacement: paso 5, imagen 1 de 2 MAGNAVOX MDV2300 Power Cord Replacement: paso 5, imagen 2 de 2
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: paso 6, imagen 1 de 1
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: paso 7, imagen 1 de 1
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Conclusión

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Justin

Miembro Desde 01/21/15

298 Reputación

2 Guías creadas

Equipo

Penn State, Team 1-41, Kaschak Winter 2015 Miembro de Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

4 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 11

Todo El Tiempo: 516