Saltar al contenido principal
Únete a la Comunidad de Reparación - Crear Cuenta

MACTREM Camera Tripod Leg Locking Hinge Replacement

Qué necesitas

  1. MACTREM Camera Tripod Leg Locking Hinge Replacement, Leg Locking Hinge: paso 1, imagen 1 de 1
    • Clean the leg that's damaged/needs maintenance.

  2. MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 2, imagen 1 de 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 2, imagen 2 de 2
    • Extend the part of the leg you will replace and/or clean.

  3. MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 3, imagen 1 de 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 3, imagen 2 de 2
    • Use the center punch and hammer to tap the pin out of the locking mechanism hinge.

    • Remove the locking mechanism lever.

  4. MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 4, imagen 1 de 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 4, imagen 2 de 2
    • Remove the leg piece from the main body.

  5. MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 5, imagen 1 de 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 5, imagen 2 de 2
    • Use the center punch and hammer to tap the pin out of the locking hinge on the opposite side of the damaged leg.

    • Remove the lever from the locking mechanism.

  6. MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 6, imagen 1 de 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: paso 6, imagen 2 de 2
    • Slide the locking hinge off the broken leg.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Joseph Brown

Miembro Desde 10/01/25

163 Reputación

1 Guía escrita

0Guía Comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 14

Ultimos 30 días: 47

Todo El Tiempo: 214