Repara tus cosas Comunidad Tienda

Lumen Projector Bulb Replacement

Introducción

This guide will provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector. In the process of this removal, it will be demonstrated how to clean the area of any dust and how to recycle the waste material- old light bulb.

Qué necesitas

  1. Lumen Projector Bulb Replacement, Unplug projector: paso 1, imagen 1 de 1

    • Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.

    Editar

  2. Lumen Projector Bulb Replacement: paso 2, imagen 1 de 1

    • On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.

    Editar

  3. Lumen Projector Bulb Replacement: paso 3, imagen 1 de 1

    • Unscrew the bulb screws on either side of the silver plate.

    Editar

  5. Lumen Projector Bulb Replacement: paso 4, imagen 1 de 1

    • Remove the light bulb from the projector by lifting the silver handle and pulling up.

    Editar

  6. Lumen Projector Bulb Replacement: paso 5, imagen 1 de 1

    • Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.

    Editar

  7. Lumen Projector Bulb Replacement: paso 6, imagen 1 de 1

    • Use a new Q-tip to clean the fan blades and hole in which the light enters.

    Editar

  8. Lumen Projector Bulb Replacement: paso 7, imagen 1 de 1

    • Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.

    Editar

  9. Lumen Projector Bulb Replacement: paso 8, imagen 1 de 1

    • Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.

    Editar

  10. Lumen Projector Bulb Replacement: paso 9, imagen 1 de 1

    • Dispose of the bulb by sending it to a recycling center.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Desiree Benitez

Miembro Desde 01/21/17

128 Reputación

1 Guía escrita

Insignias: 3

Equipo

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 Miembro de USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017

USFSM-STEWART-S17S1G1

19 Miembros

19 Guías creadas

Un comentario

Thanks for your guide provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector , how to projector Epson, is it same? because i have rental LCD Projector, definitely one day need

ericserianto - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 759