Saltar al contenido principal

Lorex LW2742 Night Vision IR LEDs Replacement

Qué necesitas

  1. Lorex LW2742 Night Vision IR LEDs Replacement, Night Vision IR LEDs: paso 1, imagen 1 de 2 Lorex LW2742 Night Vision IR LEDs Replacement, Night Vision IR LEDs: paso 1, imagen 2 de 2
    • Remove the six 10mm Torx T10 screws on the camera face.

  2. Lorex LW2742 Night Vision IR LEDs Replacement: paso 2, imagen 1 de 1
    • Remove the exterior lens cover.

  3. Lorex LW2742 Night Vision IR LEDs Replacement: paso 3, imagen 1 de 3 Lorex LW2742 Night Vision IR LEDs Replacement: paso 3, imagen 2 de 3 Lorex LW2742 Night Vision IR LEDs Replacement: paso 3, imagen 3 de 3
    • Remove the LED foam ring with tweezers.

    • Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

  4. Lorex LW2742 Night Vision IR LEDs Replacement: paso 4, imagen 1 de 2 Lorex LW2742 Night Vision IR LEDs Replacement: paso 4, imagen 2 de 2
    • Remove the two 5mm Phillips #1 screws.

    • Remove the two 8mm Phillips #0 screws.

    • When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

  5. Lorex LW2742 Night Vision IR LEDs Replacement: paso 5, imagen 1 de 2 Lorex LW2742 Night Vision IR LEDs Replacement: paso 5, imagen 2 de 2
    • Use tweezers to unclip the cables to the LED board

Conclusión

To reassemble your device, follow these instructions in reverse order.

craig crisci

Miembro Desde 09/26/16

220 Reputación

1 Guía escrita

Equipo

USF Tampa, Team 16-1, Eyestone Fall 2016 Miembro de USF Tampa, Team 16-1, Eyestone Fall 2016

USFT-EYESTONE-F16S16G1

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 15

Todo El Tiempo: 1,000