Repara tus cosas Comunidad Tienda

Lorex LW2742 Lens Replacement

Introducción

Is there a scratch, chip, or crack in your lens causing your image to be blurry? Replacing the lens may solve this problem.

Qué necesitas

  1. Lorex LW2742 Lens Replacement, Lens: paso 1, imagen 1 de 2 Lorex LW2742 Lens Replacement, Lens: paso 1, imagen 2 de 2

    • Remove the six 10mm Torx T10 screws on the camera face.

    Editar

  2. Lorex LW2742 Lens Replacement: paso 2, imagen 1 de 1

    • Remove the exterior lens cover.

    Editar

  3. Lorex LW2742 Lens Replacement: paso 3, imagen 1 de 3 Lorex LW2742 Lens Replacement: paso 3, imagen 2 de 3 Lorex LW2742 Lens Replacement: paso 3, imagen 3 de 3

    • Remove the foam ring around the lens with tweezers.

    • Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

    Editar

  5. Lorex LW2742 Lens Replacement: paso 4, imagen 1 de 1

    • Remove the two 5mm Phillips #1 screws.

    • Remove the two 8mm Phillips #0 screws.

    • When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

    Editar

  6. Lorex LW2742 Lens Replacement: paso 5, imagen 1 de 1

    • Remove the LED board with tweezers.

    • It is unnecessary to unplug the LED board from internal components for lens replacement.

    Editar

  7. Lorex LW2742 Lens Replacement: paso 6, imagen 1 de 2 Lorex LW2742 Lens Replacement: paso 6, imagen 2 de 2

    • Use the Phillips #000 to remove the three 3mm screws on the face of the camera lens

    Editar

  8. Lorex LW2742 Lens Replacement: paso 7, imagen 1 de 1

    • Remove the camera lens.

    • After replacing camera lens and before reassembly it is encouraged to clean new lens surface with a microfiber lens cleaning cloth

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Alex Kusmierz

Miembro Desde 09/26/16

601 Reputación

5 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

USF Tampa, Team 16-1, Eyestone Fall 2016 Miembro de USF Tampa, Team 16-1, Eyestone Fall 2016

USFT-EYESTONE-F16S16G1

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 893