Saltar al contenido principal

Introducción

There are two parts to the microphone: the cover and the microphone and its casing. It takes about the same amount of time to remove the cover and the microphone.

Partes

No se especificaron partes.

  1. Remove the two 8mm Phillips#0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

  3. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  4. Grasp the white wire connector between the tabs and the socket. Wiggle the connector back and forth to remove the front cover from the motherboard.
    • Grasp the white wire connector between the tabs and the socket.

    • Wiggle the connector back and forth to remove the front cover from the motherboard.

  5. Wedge the plastic opening tool into the crack between the plastic cover and microphone guard. Use the wedge to separate the two pieces. It might take more force than expected.
    • Wedge the plastic opening tool into the crack between the plastic cover and microphone guard.

    • Use the wedge to separate the two pieces.

    • It might take more force than expected.

  6. Twist the rubber casing and remove it from the plastic cover. Twist the rubber casing and remove it from the plastic cover. Twist the rubber casing and remove it from the plastic cover.
    • Twist the rubber casing and remove it from the plastic cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

nieko

Miembro Desde 18/04/13

63 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 12-34, Amido Spring 2013 Miembro de Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 1,485