Saltar al contenido principal

Introducción

The D-ring is located on the bottom side of the speaker, furthest from the volume buttons; it is in between the auxiliary and charging ports. Removing this part will also remove the port covers on the device. It is important to note that continuing to tear apart the speaker past this step will void the warranty on your Logitech UE Boom.

  1. Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.
    • Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.

  2. Lift the handle on the D-ring and unscrew it. Remove the D-ring.
    • Lift the handle on the D-ring and unscrew it.

    • Remove the D-ring.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Equipo

Cal Poly, Team 4-1, Maness Fall 2015 Miembro de Cal Poly, Team 4-1, Maness Fall 2015

CPSU-MANESS-F15S4G1

4 Miembros

15 Guías creadas

Un Comentario

What if it lost the d-ring and the cover port sleeve

Domingo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 20

Todo El Tiempo: 7,072