Logitech MX Anywhere 2 Right Click Switch Replacement

Introducción

In this Guide I will show you how to replace a broken switch on a MX Anywhere 2. Also I am a beginner (meaning a 15 year old that likes to tinker with electronics), so don't expect Pro Advice.

Qué necesitas

Paso 1 Right Click Switch

First Remove the Mouse Skates. Then removes the 4 screws underneath.

Editar

Paso 2

Take the Cover off.

Editar

Paso 3

Then take all the screws out remove the battery, the scroll wheel, and the PCB board.

Editar

Paso 4

Then use Solder pen to desolder the broken switch off the board.

Editar

Paso 5

Then, take the broken switch off the board. Once that is finished, get the new switch and put it up against the solder holes. Melt the solder and Insert the switch in the 3 holes.

Editar