Introducción
You will learn how to remove and install the support spring.
Qué necesitas
-
-
Hold the mouse so that the bottom is facing up.
-
Remove the single Phillips #1 screw from the bottom half of the mouse.
-
-
-
-
Locate the scroll wheel on the mouse.
-
Grab the scroll wheel with your thumb and index finger.
-
Gently lift up, to remove the scroll wheel from the mouse.
-
-
-
Locate the spring on the scroll wheel. The spring is a small piece of metal wire coiled in the middle.
-
Carefully remove the spring from the wheel scroll.
-
-
-
Replace the spring, place it on the correct side of the wheel with the prongs pointing down.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
6 personas más completaron esta guía.