Saltar al contenido principal

Logitech MBJ58 Mouse Buttons Replacement

Qué necesitas

  1. Logitech MBJ58 Mouse Buttons Replacement, Top cover: paso 1, imagen 1 de 1
    • Hold the mouse so that the bottom is facing up.

    • Remove the single Phillips #1 screw from the bottom half of the mouse.

  2. Logitech MBJ58 Mouse Buttons Replacement: paso 2, imagen 1 de 2 Logitech MBJ58 Mouse Buttons Replacement: paso 2, imagen 2 de 2
    • Place the mouse so that the bottom is resting against a hard surface.

    • Lift the top cover of the mouse gently, and remove it.

  3. Logitech MBJ58 Mouse Buttons Replacement, Buttons: paso 3, imagen 1 de 2 Logitech MBJ58 Mouse Buttons Replacement, Buttons: paso 3, imagen 2 de 2
    • Locate the two tabs that are protruding from the button assembly.

    • Be careful not to break either of the two tabs by squeezing too hard.

    • Pinch the tabs together to free the buttons.

  4. Logitech MBJ58 Mouse Buttons Replacement: paso 4, imagen 1 de 2 Logitech MBJ58 Mouse Buttons Replacement: paso 4, imagen 2 de 2
    • Remove the button assembly from the top cover by flipping the top cover upside down and pulling the button assembly downward and away from the top cover.

    • Slide the button assembly out from the top cover through the opening.

    • When fully disassembled, the top cover and the button assembly should look like this.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 5-14, Forte Winter 2013 Miembro de Cal Poly, Team 5-14, Forte Winter 2013

CPSU-FORTE-W13S5G14

5 Miembros

21 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 21

Todo El Tiempo: 2,901