Repara tus cosas Comunidad Tienda

Logitech Harmony Companion Button Pad Replacement

Introducción

The buttons on your Companion remote may stop working or become damaged. This guide will show you how to replace the button pad in your remote. All you'll need for this guide is a plastic opening tool and Phillips #0 screwdriver.

Qué necesitas

  1. Logitech Harmony Companion Button Pad Replacement, Remote Battery: paso 1, imagen 1 de 1

    • Hold the remote with the Logitech label toward you.

    Editar

  2. Logitech Harmony Companion Button Pad Replacement: paso 2, imagen 1 de 1

    • Push the battery cover upward.

    Editar

  3. Logitech Harmony Companion Button Pad Replacement: paso 3, imagen 1 de 3 Logitech Harmony Companion Button Pad Replacement: paso 3, imagen 2 de 3 Logitech Harmony Companion Button Pad Replacement: paso 3, imagen 3 de 3

    • Use your finger to lift the battery out of the compartment.

    • When the battery has lifted, push it up to remove it.

    Editar

  5. Logitech Harmony Companion Button Pad Replacement, Remote Motherboard: paso 4, imagen 1 de 2 Logitech Harmony Companion Button Pad Replacement, Remote Motherboard: paso 4, imagen 2 de 2

    • Remove the two 5.0 mm Phillips #0 screws.

    Editar

  6. Logitech Harmony Companion Button Pad Replacement: paso 5, imagen 1 de 2 Logitech Harmony Companion Button Pad Replacement: paso 5, imagen 2 de 2

    • Use the plastic opening tool to pry open the back cover of the remote.

    • It is recommended to have the point of the opening tool facing the back of the remote.

    • Insert the opening tool on each side of the bottom of the remote, and pull up until you hear the cover click open.

    • Pry the back cover off by sliding the plastic opening tool down each side.

    Editar

  7. Logitech Harmony Companion Button Pad Replacement: paso 6, imagen 1 de 2 Logitech Harmony Companion Button Pad Replacement: paso 6, imagen 2 de 2

    • Use the plastic opening tool to remove the motherboard.

    Editar

  8. Logitech Harmony Companion Button Pad Replacement, Button Pad: paso 7, imagen 1 de 3 Logitech Harmony Companion Button Pad Replacement, Button Pad: paso 7, imagen 2 de 3 Logitech Harmony Companion Button Pad Replacement, Button Pad: paso 7, imagen 3 de 3

    • Lift the button pad up to remove it from the remote.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Cassidy Wardlow

Miembro Desde 09/28/17

662 Reputación

4 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

USF Tampa, Team S1-G3, Nance Fall 2017 Miembro de USF Tampa, Team S1-G3, Nance Fall 2017

USFT-NANCE-F17S1G3

3 Miembros

4 Guías creadas

4 comentarios

Ou pouvons nous commander «  Logitech Harmony Companion Button Pad Replacement »

Roger Tardif - Contestar

Where can I purchase the button pad?

elijah - Contestar

Also looking to find where to purchase. I called Logitech and they were clueless. My 4 year old was better equipped to respond.

Joshua Fuller - Contestar

Thanks for posting these helpful steps. My harmony Companion was frustrating us because we had to press buttons really hard.

Cy Beaux - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 38

Todo El Tiempo: 2,974